Huawei Quidway S8500 Series User Manual

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches Chapter 1 IGMP Snooping Configuration Commands
Huawei Technologies Proprietary
1-13
View
User view
Parameter
None
Description
Using reset igmp-snooping statistics command, you can reset the IGMP Snooping
statistic information.
Related command: igmp-snooping.
Example
# Clear IGMP Snooping statistic information.
<Quidway> reset igmp-snooping statistics
1.2 Multicast Static Routing Port Configuration Commands
1.2.1 igmp-snooping mrouter port
Syntax
igmp-snooping mrouter port port-number
undo igmp-snooping mrouter port port-number
View
VLAN view
Parameter
port-number: Port number of the port to be configured as a static routing port. Provide
this argument in the format of interface-type interface-number, where the interface-type
argument can only be Ethernet port type.
Description
Use the igmp-snooping mrouter port command to configure a port in a VLAN as a
static routing port, through which IGMP packets can be transparently transmitted, so as
to meet the requirements of specific networks.
Use the undo igmp-snooping mrouter port command to remove static routing port
configuration.
By default, no static routing port is configured.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English