Huawei Quidway S8500 Series User Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-34
4.6.2 display info-center
Syntax
display info-center
View
Any view
Parameter
None
Description
Use the display info-center command to view the configuration of system log and the
information recorded in the memory buffer.
If the information in the current log/trap buffer is less than the size of buffer, display the
actual log/trap information.
Related command: info-center enable,info-center loghost,info-center
logbuffer,info-center console channel,info-center monitor channel.
Example
# Show the system log information.
<Quidway> display info-center
Information Center:enabled
Log host:
Console:
channel number:0, channel name:console
Monitor:
channel number:1, channel name:monitor
SNMP Agent:
channel number:5, channel name:snmpagent
Log buffer:
enabled, max buffer size:1024, current buffer size:256
current messages:6, channel number:4, channel name:logbuffer
dropped messages:0, overwrote messages:0
Trap buffer:
enabled, max buffer size:1024, current buffer size:256
current messages:0, channel number:3, channel name:trapbuffer
dropped messages:0, overwrote messages:0
Log file :
enabled,max file buffer size 32KB, current file buffer size 7KB,
channel number : 6, channel name : logfile

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English