Huawei Quidway S8500 Series User Manual

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches Chapter 6 MSDP Configuration Commands
Huawei Technologies Proprietary
6-5
(10.10.1.3, 225.1.1.1) 10.10.10.10 BGP 100 00:00:11 00:05:49
(10.10.1.2, 225.1.1.2) 10.10.10.10 BGP 100 00:00:11 00:05:49
(10.10.2.1, 225.1.1.2) 10.10.10.10 BGP 100 00:00:11 00:05:49
(10.10.1.2, 225.1.2.2) 10.10.10.10 BGP 100 00:00:11 00:05:49
MSDP matched 5 entries
6.1.6 display msdp sa-count
Syntax
display msdp sa-count [ as-number ]
View
Any view
Parameter
as-number: Number of sources and groups from the specified autonomous system.
Description
Use the display msdp sa-count command to view the number of sources and groups
in MSDP cache.
The cache-sa-enable command must be configured before the configuration of this
command.
Example
# view the number of sources and groups in MSDP cache.
<Quidway> display msdp sa-count
Number of cached Source-Active entries, counted by Peer
Peer's Address Number of SA
10.10.10.10 5
Number of source and group, counted by AS
AS Number of source Number of group
? 3 3
Total Source-Active entries: 5
6.1.7 import-source
Syntax
import-source [ acl acl-number ]

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English