Huawei Quidway S8500 Series User Manual

Command Manual – Security
Quidway S8500 Series Routing Switches
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-14
2.1.13 local-user password-display-mode
Syntax
local-user password-display-mode { cipher-force | auto }
undo local-user password-display-mode
View
System view
Parameter
cipher-force: Forced Cipher mode specifies that the passwords of all the accessed
users must be displayed in cipher text.
auto: The auto mode specifies that a user is allowed to use the password command to
set a password display mode.
Description
Use the local-user password-display-mode command to configure the password
display mode of all the accessing users.
Use the undo local-user password-display-mode command to cancel the password
display mode that has been set for all the accessing users.
If cipher-force has been adopted, the user efforts of specifying to display passwords in
simple text will render useless.
The default password display mode for all the access users is auto.
Related command: display local-user , password.
Example
# Force all the accessing users to display passwords in cipher text.
[Quidway] local-user password-display-mode cipher-force
2.1.14 name
Syntax
name string
undo name
View
VLAN view
Parameter
string: Name of the delivered VLAN. The name can contain up to 32 characters.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English