Huawei Quidway S8500 Series User Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 5 SNMP Configuration Commands
Huawei Technologies Proprietary
5-3
# Display SNMP group name and safe mode.
<Quidway> display snmp-agent group
Group name: huawei
Security model: v2c noAuthnoPriv
Readview: ViewDefault
Writeview: <no specified>
Notifyview :<no specified>
Storage-type: nonVolatile
The following table describes the output fields.
Table 5-2 Description on the fields of the display snmp-agent group command
Field Description
groupname SNMP Group name
Security model The security mode adopted by SNMP
readview Read-only MIB view name corresponding to that group
writeview Writable MIB view corresponding to that group
notifyview The name of the notify MIB view corresponding to that group
storage-type Storage mode
5.1.4 display snmp-agent mib-view
Syntax
display snmp-agent mib-view [ exclude | include | { viewname mib-view } ]
View
Any view
Parameter
exclude: Displays the SNMP MIB view excluded.
Include: Displays the SNMP MIB view included.
viewname: Displays the SNMP MIB view according to the mib view name.
mib-view: Specifies the MIB view name.
Description
Use the display snmp-agent mib-view command to view the MIB view configuration
information of the Ethernet switch.
Example

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English