Huawei Quidway S8500 Series User Manual

Command Manual – Network Protocol
Quidway S8500 Series Routing Switches Chapter 4 DHCP Configuration Commands
Huawei Technologies Proprietary
4-33
ServerIpAddress: 192.168.1.2
*0.7200230-DHCP-8-dhcp_debug:
From server to client:
Interface: VLAN-Interface 1
ServerGroupNo: 0
Type: dhcp-ack
ClientHardAddress: 0010-dc19-695d
your ip address: 10.1.1.1
*0.7200580-DHCP-8-largehop:
Discard DHCP request packet because of too large hop count!
*0.7200725-DHCP-8-invalidpkt:
Wrong DHCP packet!
Table 4-6 Description on the fields of the debugging dhcp-relay command
Field Description
Interface The VLAN interface that forwards DHCP packets
Type Type of the forwarded DHCP packet
ClientHardAddress The MAC address of the DHCP client
ServerIpAddress The IP address of the DHCP server
your ip address The IP address assigned to the DHCP client
4.3.2 dhcp relay security
Syntax
dhcp relay security ip-address mac-address static
undo dhcp relay security ip-address
View
System view
Parameter
ip-address: IP address the user uses.
mac-address: MAC address the user owns.
static: Specifies the user address entry is static.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English