Huawei Quidway S8500 Series - Peer Next-Hop-Local

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches
Chapter 7 MBGP Multicast Extension
Configuration Commands
Huawei Technologies Proprietary
7-22
View
IPv4 multicast sub-address family view
Parameter
group-name: Name of peer group.
peer-address: IP address of the peer, in dotted decimal format.
prefixname: Name of the specified ip-prefix, a character string of 1 to 19 characters.
Description
Use the peer ip-prefix import command to configure the route filtering policy of routes
received by the peer based on the ip-prefix.
Use the undo peer ip-prefix import command to cancel the route filtering policy of the
peer based on the ip-prefix.
By default, the route filtering policy of the peer is not specified.
The inbound route policy configured for the peer takes precedence over the
configurations for the peer group.
Related command: peer ip-prefix export.
Example
# Configure the route filtering policy of the peer group1 based on the ip-prefix list1.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] bgp 100
[Quidway-bgp] ipv4-family multicast
[Quidway-bgp-af-mul] peer group1 ip-prefix list1 import
7.1.32 peer next-hop-local
Syntax
peer group-name next-hop-local
undo peer group-name next-hop-local
View
IPv4 multicast sub-address family view
Parameter
group-name: Name of the peer group.