Huawei Quidway S8500 Series - Query Vdsllink

Command Manual – Integrated Management
Quidway S8500 Series Routing Switches Chapter 1
HGMP V1 Configuration Commands
Huawei Technologies Proprietary
1-45
View
lanswitch view
Parameter
None
Description
Use the query used addrnum command to query the number of the occupied address
entries of the Ethernet switch.
Example
# Query the occupied address entries of the Ethernet switch with a position parameter
of 3/1/3-/.
[Quidway-lanswitch3/1/3-/] query used addrnum
Waiting.....
Unicast addrItem:7 ,Multicast AddrItem :6
Table 1-15 Description on the fields of the query used addrnum command
Field Description
Unicast addrItem Number of occupied unicast MAC address entries
Multicast AddrItem Number of occupied multicast MAC address entries
1.3.22 query vdsllink
Syntax
query vdsllink [ port-list ]
View
lanswitch view
Parameter
port-list: The port list that requires configuring.
Description
Use the query vdsllink command to query the VDSL link rate of the port.
Example
# Query the VDSL link rate of port 1 of the Ethernet switch with the position parameter
of “8/1/1-/”