Huawei Quidway S8500 Series User Manual

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-33
undo peer group-name as-path-acl acl-number export
View
BGP view
Parameter
group-name: Specifies name of the peer group.
acl-number: Number of an AS path list, in the range of 1 to 199.
export: Applies the AS path list to advertised routes.
Description
Use the peer as-path-acl export command to configure filtering Policy of BGP
advertised routes based on AS path list.
Use the undo peer as-path-acl command to cancel the existing configuration.
By default, the peer group has no AS path list.
This command can only be configured on the peer group. The acl-number specifies the
number of the AS path list. It is configured by the ip as-path-acl command rather than
the acl command.
Related command: peer as-path-acl import, ip as-path-acl.
Example
# Configure to filter the routes advertised by the peer group test using the AS path-list 1.
[Quidway-bgp] peer test as-path-acl 1 export
5.1.36 peer as-path-acl import
Syntax
peer { group-name | peer-address } as-path-acl acl-number import
undo peer { group-name | peer-address } as-path-acl acl-number import
View
BGP view
Parameter
group-name: Specifies the name of the peer group.
peer-address: Specifies IP address of the peer, in dotted decimal format.
acl-number: Specifies the filter list number of an AS regular expression. The range is 1
to 199.
import: Applies the AS path list to received routes.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English