Huawei Quidway S8500 Series User Manual

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-6
Parameter
None
Description
Use the confederation nonstandard command to configure the router to be
compatible with routers not following RFC1965.
Use the undo confederation nonstandard command to disable this function.
By default, it is in accordance with RFC1965.
Related command: confederation id, confederation peer-as.
Example
# AS100 contains routers following nonstandard, which is composed of two sub-ASs,
64000 and 65000.
[Quidway] bgp 64000
[Quidway-bgp] confederation id 100
[Quidway-bgp] confederation peer-as 65000
[Quidway-bgp] confederation nonstandard
5.1.7 confederation peer-as
Syntax
confederation peer-as as-number-1 [... as-number-n ]
undo confederation peer-as [ as-number-1 ] [... as-number-n ]
View
BGP view
Parameter
as-number-1...as-number-n: Sub-AS number. The range is 1 to 65535. This command
can configure a maximum of 32 Sub-ASs belonging to a confederation.
Description
Use the confederation peer-as command to configure a confederation consisting of
which Sub-ASs.
Use the undo confederation peer-as command to delete the specified Sub-AS in the
confederation.
By default, no autonomous system is configured as a member of the confederation.
Before this command is performed, the confederation ID should be configured by the
confederation id command. Otherwise this configuration is invalid. The configured

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English