Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 4 Integrated IS-IS Configuration Commands
Huawei Technologies Proprietary
4-7
Description
Use the display isis lsdb command to view the link state database of the IS-IS.
Example
# Display the information of an LSP.
<Quidway> display isis lsdb 0050.0500.5005.00-00
IS-IS Level-1 Link State Database
Lsp ID Sequence Holdtime A_P_O Checksum
>0050.0500.5005.00-00 0x00000328 780 0_0_0 0xf211
4.1.7 display isis mesh-group
Syntax
display isis mesh-group
View
Any view
Parameter
None
Description
Use the display isis mesh-group command to view the IS-IS mesh group.
This command is used for displaying the configurations of the mesh-group of the
current router interface.
Example
# Add Interface Vlan-interface 10 and Interface Vlan-interface 20 running IS-IS into
mesh group 100.
[Quidway-Vlan-interface10] isis mesh-group 100
[Quidway] interface Vlan-interface 20
[Quidway-Vlan-interface20] isis mesh-group 100
# Display the information of IS-IS mesh-group.
[Quidway-Vlan-interface20] display isis mesh-group
Interface Mesh-group/Blocked
Vlan-interface 10 100
Vlan-interface 20 100