Huawei Quidway S8500 Series User Manual

Command Manual – Network Protocol
Quidway S8500 Series Routing Switches Chapter 4 DHCP Configuration Commands
Huawei Technologies Proprietary
4-1
Chapter 4 DHCP Configuration Commands
4.1 General DHCP Configuration Commands
4.1.1 dhcp enable
Syntax
dhcp enable
undo dhcp enable
View
System view
Parameter
None
Description
Use the dhcp enable command to enable DHCP service.
Use the undo dhcp enable command to disable the DHCP service.
For both DHCP server and DHCP relay, you must enable DHCP service first before
performing other DHCP configurations. The other related DHCP configurations take
effect only after DHCP service is enabled.
Example
# Enable DHCP service.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] dhcp enable
4.1.2 dhcp select
Syntax
In VLAN interface view:
dhcp select { global | interface | relay }
undo dhcp select
In system view:
dhcp select { global | interface | relay } { interface vlan-interface vlan-id [ to
vlan-interface vlan-id ] | all }

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English