Huawei Quidway S8500 Series User Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches Chapter 2 BGP/MPLS VPN Configuration Commands
Huawei Technologies Proprietary
2-43
Example
# Set the minimum interval for sending routing update packet to the BGP peer group
group1 to be 10 seconds.
[Quidway-bgp-af-vpn-instance] peer group1 route-update-interval 10
2.1.51 peer timer
Syntax
peer { group-name | peer-address } timer keep-alive keepalive-interval hold
holdtime-interval
undo peer { group-name | peer-address } timer
View
VPN-instance subaddress family view
Parameter
group-name: Name of a neighbor peer group, consisting of 1 to 47 alphanumeric
characters.
peer-address: Peer IP address in dotted decimal format.
keepalive-interval: Interval of sending the Keepalive message. It is in seconds, ranging
from 1 to 65535, and with the default value 60.
holdtime-interval: Holdtime, ranging from 3 to 65535 in seconds, and with the default
value 180 seconds.
Description
Use the peer timer command to set the Keepalive interval and holdtime for peers.
Use the undo peer timer command to restore the default setting.
The timer set with the peer timer command enjoys higher precedence than the timer
with the timer command.
Related command: timer keep-alive hold.
Example
# Set the Keepalive interval and holdtime for the peer group test.
[Quidway-bgp-af-vpn-instance] peer test timer keep-alive 60 hold 180
2.1.52 peer upe
Syntax
peer peer-address upe

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English