Huawei Quidway S8500 Series User Manual

Command Manual – VLAN&QinQ
Quidway S8500 Series Routing Switches Chapter 4
Isolate-User-Vlan Configuration Commands
Huawei Technologies Proprietary
4-4
4.1.3 isolate-user-vlan enable
Syntax
isolate-user-vlan enable
undo isolate-user-vlan enable
View
VLAN view
Parameter
None
Description
Use the isolate-user-vlan enable command to set a VLAN as an isolate-user-VLAN.
Use the undo isolate-user-vlan enable command to cancel the configuration.
An isolate-user-VLAN is allowed to contain multiple ports, including upstream ports
connecting to other switches. However, the VLAN can only contain access or hybrid
ports, not trunk ports.
Related command: display isolate-user-vlan.
 Note:
z You cannot configure VLAN 1 as an isolate-user-VLAN or Secondary VLAN.
z You cannot directly configure isolate-user-VLAN as other types of VLAN than
common VLAN, such as Secondary VLAN, multicast VLAN, Super VLAN/Sub VLAN,
Guest VLAN and VLAN running L2VPN services. You cannot directly configure
Secondary VLAN as other type of VLAN than common VLAN, such as
isolate-user-VLAN, multicast VLAN, super VLAN/sub VLAN, guest VLAN and VLAN
running L2VPN services.
z When you configure common VLAN as isolate-user-VLAN or Secondary VLAN, the
VLAN cannot contain trunk ports. Otherwise, the configuration will fail.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English