Huawei Quidway S8500 Series - Dynamic DNS Configuration Commands; Debugging Dns

Command Manual – Network Protocol
Quidway S8500 Series Routing Switches Chapter 6 DNS Configuration Commands
Huawei Technologies Proprietary
6-2
Parameter
None
Description
Use the display ip host command to view all the host names and the corresponding IP
addresses.
Example
# Display all host names and the corresponding IP addresses of the hosts.
<Quidway> display ip host
Host Age Flags Address
My 0 static 1.1.1.1
Aa 0 static 2.2.2.4
Table 6-1 Description on the fields of the display ip host command
Field Description
Host Host name
Age Valid period
Flags Flags
Address Host IP address
6.2 Dynamic DNS Configuration Commands
6.2.1 debugging dns
Syntax
debugging dns
undo debugging dns
View
User view
Parameter
None
Description
Use the debugging dns command to enable DNS debugging.
Use the undo debugging dns command to disable DNS debugging.