Huawei Quidway S8500 Series User Manual

Command Manual – Network Protocol
Quidway S8500 Series Routing Switches Chapter 4 DHCP Configuration Commands
Huawei Technologies Proprietary
4-4
event: Used to enable/disable debugging for DHCP server events, including the
assigning of IP addresses and timing out of ping packets.
packet: Specifies debugging for packets received/sent by DHCP servers, including
DHCP packets and ping packets.
Description
Use the debugging dhcp server command to enable debugging for DHCP server.
Use the undo debugging dhcp server command to disable debugging for DHCP
server.
Each type of debugging concerning DHCP servers is disabled by default.
Example
# Enable debugging for DHCP server events.
<Quidway> debugging dhcp server event
4.2.2 display dhcp server forbidden-ip
Syntax
display dhcp server forbidden-ip
View
Any view
Parameter
None
Description
Use the display dhcp server forbidden-ip command to display forbidden IP
addresses in the DHCP address pool.
Example
# Display forbidden IP addresses in the DHCP address pool.
<Quidway> display dhcp server forbidden-ip
Forbidden IP Range from 3.3.3.1 to 3.3.3.1
Forbidden IP Range from 3.3.3.4 to 3.3.3.99
Forbidden IP Range from 3.3.3.101 to 3.3.3.254
Forbidden IP Range from 17.9.0.1 to 17.9.0.1
Forbidden IP Range from 17.9.0.3 to 17.9.0.5
Forbidden IP Range from 17.9.0.8 to 17.9.255.254

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English