Huawei Quidway S8500 Series - Chapter 7 Route Capacity Configuration Commands; Route Capacity Configuration Commands; Router Route-Limit; Router VRF-Limit

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 7 Route Capacity Configuration Commands
Huawei Technologies Proprietary
7-1
Chapter 7 Route Capacity Configuration
Commands
7.1 Route Capacity Configuration Commands
7.1.1 router route-limit
Syntax
router route-limit { 128K | 256K | 512K }
View
System view
Parameter
128K: Sets the maximum number of route entries supported by current system to 128
K.
256K: Sets the maximum number of route entries supported by current system to 256
K.
512K: Sets the maximum number of route entries supported by current system to 512
K.
Description
Use the router route-limit command to set the maximum number of route entries
supported by the current system. If the maximum number of route entries supported by
a card is less than this number, the system will inhibit the card from working.
By default, the maximum number of route entries is 128 K.
Example
# Set the maximum number of route entries supported by the current system to 256 K.
[Quidway] router route-limit 256K
7.1.2 router VRF-limit
Syntax
router VRF-limit { 256 | 512 | 1024 }
View
System view