Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 7 Route Capacity Configuration Commands
Huawei Technologies Proprietary
7-2
Parameter
256: Sets the maximum number of VPN routing & forwarding instances (VRFs)
supported by current system to 256.
512: Sets the maximum number of VRFs supported by current system to 512.
1024: Sets the maximum number of VRFs supported by current system to 1024.
Description
Use the router VRF-limit command to set the maximum number of VPN routing and
forwarding instances (VRFs) supported by current system. If the number of VRFs
supported by a card is less than this number, the system will inhibit the card from
working. This number is 256 by default.
Example
# Set the maximum number of VRFs supported by current system to 512.
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway]router VRF-limit 512
To Next Page
Loading...
