Huawei Quidway S8500 Series User Manual

Command Manual – Port
Quidway S8500 Series Routing Switches Chapter 5 IDS Linkage Configuration Commands
Huawei Technologies Proprietary
5-2
name: Name of the IDS item to be displayed.
source ip-addr: Displays IDS linkage information about the specified source IP address.
destination ip-addr: Displays IDS linkage information about the specified destination IP
address.
controlled-interface: Displays a list of ports with IDS linkage currently enabled.
Description
Use the display ids command to display IDS linkage information, which includes:
z The total number of IDS linkage messages
z The list of ports available for IDS linkage
z Displays the IDS linkage information which meets the requirement on by one
Example
# Display all information about IDS linkage.
[Quidway]display ids all
Port list under IDS control is:
Ethernet2/1/10 Ethernet2/1/11 Ethernet2/1/12
Ethernet2/1/13 Ethernet2/1/14 Ethernet2/1/15
ACL group ID list used by IDS is:
3997 3996 3995 3994 3993 3992 3991 3990 3989 3988
Number of items 1, running items 1
ACL rules created by IDS is:
1 Name 4
Action deny, time 3000, curtime 2860, group 3997, subitem 0
Smac any, sip any, swild 255.255.255.255, prot 1
Dmac any, dip any, dwild 255.255.255.255, prot 1
5.1.3 debugging ids-acl
Syntax
debugging ids-acl
undo debugging ids-acl
View
User view
Parameter
None
Description
Use the debugging ids-acl command to enable IDS linkage debugging.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English