Huawei Quidway S8500 Series User Manual

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-41
[Quidway] interface Vlan-interface 10
[Quidway-Vlan-interface10] ospf dr-priority 8
3.1.40 ospf mib-binding
Syntax
ospf mib-binding process-id
undo ospf mib-binding
View
System view
Parameter
process-id: ID of an OSPF process, in the range 1 to 65,535. If no OSPF process is
specified, the default process ID 1 applies.
Description
Use the ospf mib-binding command to bind the MIB operation to the specified OSPF
process.
Use the undo ospf mib-binding command to restore the default.
When OSPF protocol enables the first process, it always binds MIB operation to this
process. You can use this command to bind MIB operation to another OSPF process.
Execute the undo ospf mib-binding command if you want to cancel the setting. OSPF
will automatically re-bind MIB operation to the first process that it enables.
By default, MIB operation is bound to the first enabled OSPF process.
Example
# Bind MIB operation to OSPF process 100.
[Quidway] ospf mib-binding 100
# Restore the default MIB binding.
[Quidway] undo ospf mib-binding
3.1.41 ospf mtu-enable
Syntax
ospf mtu-enable
undo ospf mtu-enable
View
Interface view

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English