Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches Chapter 1 IGMP Snooping Configuration Commands
Huawei Technologies Proprietary
1-2
1.1.2 display igmp-snooping configuration
Syntax
display igmp-snooping configuration
View
Any view
Parameter
None
Description
Use the display igmp-snooping configuration command to view the IGMP Snooping
configuration information.
When IGMP Snooping is enabled, the information displayed includes whether IGMP
Snooping is enabled, router port aging time, maximum response time of a query,
multicast group port aging time, and whether unknown multicast packets are disabled
from flooding within VLANs.
Related command: igmp-snooping.
Example
# Display the IGMP Snooping configuration information of the switch.
<Quidway> display igmp-snooping configuration
Enable IGMP-Snooping.
Enable IGMP-Snooping.
The router port timeout is 105 second(s).
The max response timeout is 1 second(s).
The host port timeout is 260 second(s).
Enable IGMP-Snooping Non-Flooding.
The information above tells us that: IGMP Snooping is enabled; the router port aging
time is set to be 105 seconds; the max response time of a query is set to be 1 seconds;
the aging time of a multicast group member is set to be 260 seconds. Non-broadcasting
of unknown multicast data packets in a VLAN is enabled.
1.1.3 display igmp-snooping group
Syntax
display igmp-snooping group [ vlan vlan-id ]
View
Any view