Huawei Quidway S8500 Series User Manual

Command Manual – Security
Quidway S8500 Series Routing Switches
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-42
Use the undo secondary accounting command to restore the IP address and port
number to default values.
For detailed information, read the description of the primary accounting command.
Related command: key, radius scheme, state.
Example
# Set the IP address of the secondary accounting server of RADIUS scheme, huawei,
to 10.110.1.1 and the UDP port 1813 to provide RADIUS accounting service.
[Quidway-radius-huawei] secondary accounting 10.110.1.1 1813
2.2.22 secondary authentication
Syntax
secondary authentication ip-address [ port-number ]
undo secondary authentication
View
RADIUS scheme view
Parameter
ip-address: IP address, in dotted decimal format. By default, the IP address of
secondary authentication/authorization server is 0.0.0.0.
port-number: Specifies the UDP port number, ranging from 1 to 65535. By default, the
authentication/authorization service is provided via UDP 1812.
Description
Use the secondary authentication command to configure the IP address and port
number for the secondary RADIUS authentication/authorization server.
Use the undo secondary authentication command to restore the IP address and port
number to default values.
For detailed information, read the description of the primary authentication
command.
Related command: key, radius scheme, state.
Example
# Set the IP address of the secondary authentication/authorization server of RADIUS
scheme, “huawei”, to 10.110.1.2 and the UDP port 1812 to provide RADIUS
authentication/authorization service.
[Quidway-radius-huawei] secondary authentication 10.110.1.2 1812

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English