Huawei Quidway S8500 Series User Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-43
This command takes effect only after the system logging is enabled.
Related command: info-center enable, display info-center.
Example
# Send log information to buffer and sets the size of buffer as 50.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] info-center logbuffer size 50
4.6.10 info-center logfile
Syntax
info-center logfile
undo info-center logfile
View
System view
Parameter
None
Description
Use the info-center logfile command to configure to output information to the logfile.
Use the undo info-center logfile command to cancel the information output to logfile.
This command takes effect only after the system logging is enabled.
Related command: info-center enable, display info-center.
Example
# Send log information to logfile.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] info-center logfile
4.6.11 info-center loghost
Syntax
info-center loghost host-ip-addr [ channel { channel-number | channel-name } |
facility local-number | language { chinese | english } ]*
undo info-center loghost host-ip-addr

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English