Huawei Quidway S8500 Series - Reset Vrrp Statistics

Command Manual – Reliability
Quidway S8500 Series Routing Switches Chapter 1
VRRP Configuration Commands
Huawei Technologies Proprietary
1-5
15 15 Initialize 100 1 NONE 15.15.15.192
16 16 Initialize 100 1 NONE 16.16.16.192
17 17 Initialize 100 1 NONE 17.17.17.192
Table 1-2 Description on the fields of the display vrrp summary command
Field Description
Run Method Run method: real or virtual MAC method
Virtual IP ping
Whether to enable to ping through virtual IP
address
VRID ID of virtual router
Adver.Timer Interval for sending vrrp packets
State Running state of virtual router
Run Pri Run priority
Auth Type Authentication type
Virtual IP Virtual IP address list of virtual router
1.1.5 reset vrrp statistics
Syntax
reset vrrp statistics [ vlan-interface interface-number [ virtual-router-ID ] ]
View
User view
Parameter
statistics: VRRP statistics.
vlan-interface interface-number: Interface name.
virtual-router-ID: VRRP virtual router ID, ranging from 1 to 255.
Description
Use the reset vrrp statistics command to clear the statistics information about VRRP.
If the interface name and virtual router ID are not specified, the statistics information
about all the virtual routers on the switch will be cleared. If only the interface name is
specified, the statistics information about all the virtual routers on the interface will be
cleared. If the interface name and virtual router ID are specified, the statistics
information about the specified virtual router on the interface will be cleared.