Huawei Quidway S8500 Series - Password

Command Manual – Getting Started
Quidway S8500 Series Routing Switches Chapter 2
Password Control Configuration Commands
Huawei Technologies Proprietary
2-3
Example
# Display the super password control information.
<Quidway> display password-control super
Super's password settings:
Password Aging : Enabled(10 days)
Password Length: Enabled(10 Characters)
2.1.4 password
Syntax
password
View
Local user view
Parameter
None
Description
Use the password command to configure a system login password. To change a
password, just log in to the switch and carry out this command.
For related configuration, refer to password-control.
Example
# Set the system login password to 9876543210.
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway]local-user test
[Quidway-luser-test]password
Password:**********
confirm:**********
# change the system login password to 0123456789.
[Quidway-luser-test]password
Password:**********
Confirm :**********
Updating password-file ,please waiting ...