Huawei Quidway S8500 Series - Display Ospf Asbr-Summary

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-12
Example
# Display the information of the OSPF area border routers and autonomous system
border routers.
<Quidway> display ospf abr-asbr
OSPF Process 1 with Router ID 10.110.98.138
Routing Table to ABR and ASBR
I = Intra i = Inter A = ASBR B = ABR S = SumASBR
Destination Area Cost Nexthop Interface
IA 2.2.2.2 0.0.0.0 10 10.153.17.89 Vlan-interface1
Table 3-1 Description of the fields of the display ospf abr-asbr command
Field Description
Destination Router ID of the ABR or ASBR
Area Area where the router is connected with ASBR
Cost The routing overhead value of the route
Nexthop Nexthop address
Interface The local output interface
3.1.15 display ospf asbr-summary
Syntax
display ospf [ process-id ] asbr-summary [ ip-address mask ]
View
Any view
Parameter
process-id: Process ID of OSPF. The command is applied to all current OSPF
processes if you do not specify a process ID.
ip-address: Matched IP address in dotted decimal format.
mask: IP address mask in dotted decimal format.
Description
Use the display ospf asbr-summary command to view the summary information of
OSPF imported route.
If the parameters are not set, the summary information of all OSPF imported routes will
be displayed.
Related command: asbr-summary.