Huawei Quidway S8500 Series - Query Address

Command Manual – Integrated Management
Quidway S8500 Series Routing Switches Chapter 1
HGMP V1 Configuration Commands
Huawei Technologies Proprietary
1-34
# Display information about the current configuration of the Ethernet switch.
[Quidway-lanswitch3/1/3-/] query active-configuration
Waiting......
Inquire running configuration successfully,Current configuration is :
Building running configuration...
Current configuration is :
#
hostname Quidway
#
hgmp enable
#
no qos
#
line aux
speed 9600
Table 1-8 Description on the fields of the query active-configuration command
Field Description
Current configuration is
The information that follows is the items of the
current configuration separated by the symbol #.
1.3.10 query address
Syntax
query address agedtime
View
Lanswitch view
Parameter
None.
Description
Use the query address agedtime command to query the address aged time of the
device.
Example
# Query the address aged time of the Ethernet switch with the position parameter of
“8/1/1-/”