Huawei Quidway S8500 Series User Manual

Command Manual – Network Protocol
Quidway S8500 Series Routing Switches Chapter 4 DHCP Configuration Commands
Huawei Technologies Proprietary
4-29
View
User view
Parameter
ip-address: Clears statistics about the specified IP address conflicts.
all: Clears all statistics about address conflicts.
Description
Use the reset dhcp server conflict command to clear statistics information about
DHCP address conflicts.
Related command: display dhcp server conflict.
Example
# Clear all statistics information about DHCP address conflicts.
<Quidway> reset dhcp server conflict all
4.2.28 reset dhcp server ip-in-use
Syntax
reset dhcp server ip-in-use{ all | interface [ vlan-interface vlan-id ] | ip ip-address |
pool [ pool-name ] }
View
User view
Parameter
all: Specifies all binding entries.
ip-address: Specifies the binding entry that contains the specified IP address.
pool-name: Specifies a global DHCP address pool. If you do not provide this argument,
then all global DHCP address pools are included.
vlan-id: Specifies a VLAN interface DHCP address pool. If you do not provide this
argument, then all VLAN interface DHCP address pools are included.
Description
Use the reset dhcp server ip-in-use command to clear configuration about
dynamically bound DHCP addresses.
Related command: display dhcp server ip-in-use.
Example
# Clear the binding entries that contain the IP address of 10.110.1.1.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English