Huawei Quidway S8500 Series User Manual

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches
Chapter 7 MBGP Multicast Extension
Configuration Commands
Huawei Technologies Proprietary
7-26
Use the undo peer route-policy import command to delete the specified
Route-policy.
By default, the peer has no Route-policy association.
The inbound route policy configured for the peer takes precedence over the
configurations for the peer group.
Related command: peer route-policy export.
Example
# Apply the Route-policy named test-policy to the route coming from the peer group
test.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] bgp 100
[Quidway-bgp] ipv4-family multicast
[Quidway-bgp-af-mul] peer test route-policy test-policy import
7.1.37 preference
Syntax
preference ebgp-value ibgp-value local-vlaue
undo preference
View
IPv4 multicast sub-address family view
Parameter
ebgp-value: EBGP route priority, in the range of 1 to 256. By default, it is 256.
ibgp-value: IBGP route priority, in the range of 1 to 256. By default, it is 256.
local-value: Local route priority, in the range of 1 to 256. By default, it is 130.
Description
Use the preference command to configure MBGP protocol priority.
Use the undo preference command to restore the default priority.
You can configure different priority values for different types of MBGP routes.
Example
# Set the priority of EBGP, IBGP and local routes all as 170.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] bgp 100

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English