Command Manual – Security
Quidway S8500 Series Routing Switches
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-15
Description
Use the name command to configure the name of a delivered VLAN.
Use the undo name command to remove the name configured for a delivered VLAN.
By default, a delivered VLAN has no name.
The name command works with the function of dynamic VLAN delivering. For
information about dynamic VLAN delivering, refer to the vlan-assignment-mode
command.
Related command: dot1x guest-vlan, vlan-assignment-mode.
Example
# Set the name of VLAN 100 to test.
[Quidway] vlan 100
[Quidway-vlan100] name test
2.1.15 password
Syntax
password { simple | cipher } password
undo password
View
Local user view
Parameter
simple: Specifies to display passwords in simple text.
cipher: Specifies to display passwords in cipher text.
password: Defines a password, which is a character string of up to 16 characters if it is
in simple text and of up to 24 characters if it is in cipher text.
Description
Use the password command to configure a password display mode for local users.
Use the undo password command to cancel the specified password display mode.
If local-user password-display-mode cipher-force has been adopted, the user
efforts of using the password command to set the password display mode to simple
text (simple) will render useless.
Related command: display local-user.
To Next Page
Loading...
