Command Manual – PoE
Quidway S8500 Series Routing Switches Chapter 1 PoE Configuration Commands
Huawei Technologies Proprietary
1-6
Parameter
max-power: Maximum power distributed to the port, ranging from 3000 mW to 16800
mW.
Description
Use the poe max-power command to set the maximum PoE power on the current port.
Use the undo poe max-power command to restore the default PoE power on current
port.
By default, the maximum PoE power on a port is 16800 mW.
Example
# Set the maximum PoE power on current port to 12000 mW.
[Quidway-GigabitEthernet3/1/1] poe max-power 12000
# Restore the default PoE power on current port.
[Quidway-GigabitEthernet3/1/1] undo poe max-power
1.1.7 poe max-power slot
Syntax
poe max-power max-power slot slot-num
undo poe max-power slot slot-num
View
System view
Parameter
max-power: Maximum power distributed to the card, ranging from 37 W to 806 W.
slot-num: Slot number of a card.
Description
Use the poe max-power command to set the maximum power on a card.
Use the undo poe max-power command to restore the default maximum power on the
card.
By default, the maximum power on a card is 806 W.
Example
# Set the maximum power on the card in slot 3 to 400 W.
[Quidway] poe max-power 400 slot 3
# Restore the default maximum power on the card.
To Next Page
Loading...
