Huawei Quidway S8500 Series - Display Mpls Statistics

Command Manual – MPLS
Quidway S8500 Series Routing Switches Chapter 1 MPLS Basic Configuration Commands
Huawei Technologies Proprietary
1-4
verbose: Displays detailed information.
Description
Use the display mpls static-lsp command to view the information of one static LSP or
all.
Related command: display mpls interface, display mpls lsp and display mpls
statistics.
Example
# Display the static LSP information.
<Quidway-mpls> display mpls static-lsp
--------------------------------------------------------------------
LSP Information: Static Lsp
--------------------------------------------------------------------
NO FEC NEXTHOP I/O-LABEL OUT-INTERFACE
1 1.1.1.1/32 200.5.5.4 -----/1000 Vlan2000
TOTAL: 1 Record(s) Found.
1.1.5 display mpls statistics
Syntax
display mpls statistics { interface { Vlan-interface | all } | lsp { lsp-Index | all |
lsp-name }}
View
Any view
Parameter
interface { Vlan-interface | all }: Specifies one interface or all interfaces.
lsp { lsp-Index | all | lsp-name }: Specifies one label switching path or all label switching
paths. Where lsp-Index is an LSP index, lsp-name is an LSP name, and all represents
all LSPs.
Description
Use the display mpls statistics command to view the MPLS statistics about one
specific VLAN interface/LSP or all interfaces/LSPs.
Related command: display mpls interface and display mpls lsp.
Example
# Display MPLS statistics about all LSPs