Huawei Quidway S8500 Series - Close; Debugging

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-31
Description
Use the cdup command to change working path to the upper level directory.
This command is used to exit the current directory and return to the upper level
directory.
Example
# Change working path to the upper level directory.
<Quidway> ftp
[ftp] cdup
1.4.6 close
Syntax
close
View
FTP Client view
Parameter
None
Description
Use the close command to disconnect FTP client side from FTP server side without
exiting FTP client side view. That is to say, you can terminate the control connection
and data connection with the remote FTP Server at the same time.
Example
# Terminate connection with the remote FTP Server and stays in FTP Client view.
<Quidway> ftp
[ftp] close
1.4.7 debugging
Syntax
debugging
undo debugging
View
FTP Client view