Huawei Quidway S8500 Series User Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-10
4.2.7 clock ssmcontrol
Syntax
clock ssmcontrol { on | off }
View
System view
Parameter
on: Enable SSM to be engaged in control.
off: Disable SSM from being engaged in control.
Description
Use the clock ssmcontrol command to set whether the SSM function of the clock
module is engaged in control.
z SSM is engaged in control: The level of the clock source is first determined by its
SSM level during automatic clock source switching.
z SSM is not engaged in control: The SSM level can be set and queried, but the
SSM level of the clock source is neglected during automatic clock source
switching.
The SSM function of the clock module is not engaged in control by default.
Example
# Enable the SSM function to get engaged in control,
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] clock ssmcontrol on
4.2.8 clock stop warm-up
Syntax
clock stop warm-up
View
System view
Parameter
None

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English