Huawei Quidway S8500 Series User Manual

Command Manual – STP
Quidway S8500 Series Routing Switches Chapter 1
MSTP Configuration Commands
Huawei Technologies Proprietary
1-6
Related command: reset stp.
Example
# Display the state and statistics information about the spanning tree.
<Quidway> display stp instance 0 interface Ethernet 2/1/1 to Ethernet 2/1/4
GigabitEthernet 3/2/1 to GigabitEthernet 3/2/4 GigabitEthernet 3/3/1 brief
MSTID Port Role STP State Protection
0 Ethernet2/1/1 ALTE DISCARDING LOOP
0 Ethernet2/1/2 DESI FORWARDING NONE
0 Ethernet2/1/3 DESI FORWARDING NONE
0 Ethernet2/1/4 DESI FORWARDING NONE
0 GigabitEthernet3/2/1 DESI FORWARDING NONE
0 GigabitEthernet3/2/2 DESI FORWARDING NONE
0 GigabitEthernet3/2/3 DESI FORWARDING NONE
0 GigabitEthernet3/2/4 DESI FORWARDING NONE
0 GigabitEthernet3/3/1 ROOT FORWARDING NONE
Table 1-2 Description on the fields of the display stp command
Field Description
MSTID MST instance ID in a MST region
Port Port number, corresponding to the related MST instance
Role Role of the port
STP State
Port STP state, including enabled status and disabled status, and
also monitoring and learning status during transition
Protection Protection type on the port
1.1.5 display stp region-configuration
Syntax
display stp region-configuration
View
Any view
Parameter
None
Description
Use the display stp region-configuration command to view the effective MST region
configurations.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English