Huawei Quidway S8500 Series - Debugging Bgp Mp-Update; Default Local-Preference

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches
Chapter 7 MBGP Multicast Extension
Configuration Commands
Huawei Technologies Proprietary
7-3
7.1.3 debugging bgp mp-update
Syntax
debugging bgp mp-update [ receive | send ] [ verbose ]
undo debugging bgp mp-update
View
User view
Parameter
receive: Debugs the MBGP Update messages received.
send: Debugs the MBGP Update messages sent.
verbose: Debugs detailed information.
Description
Use the debugging bgp mp-update command to enable to debug MBGP Update
messages.
Use the undo debugging bgp mp-update command to disable the debugging.
By default, the debugging function is disabled.
Example
# Enable MBGP Update message debugging.
<Quidway> debugging bgp mp-update
7.1.4 default local-preference
Syntax
default local-preference value
undo default local-preference
View
IPv4 multicast sub-address family view
Parameter
value: Configures default local precedence, in the range of 0 to 4294967295. By default,
it is 100. The greatest value corresponds to the highest precedence level.
Description
Use the default local-preference command to configure the default local precedence.
Use the undo default local-preference command to restore the default value.