Huawei Quidway S8500 Series User Manual

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches Chapter 1 IGMP Snooping Configuration Commands
Huawei Technologies Proprietary
1-1
Chapter 1 IGMP Snooping Configuration
Commands
1.1 IGMP Snooping Configuration Commands
1.1.1 debugging mpm
Syntax
debugging mpm { abnormal | all | event | forward | groups | packets | timer }
undo debugging mpm { abnormal | all | event | forward | groups | packets | timer }
View
User view
Parameter
abnormal: Enables IGMP snooping abnormal debugging
all: Turns on all IGMP snooping debugging switches
events: Enables IGMP snooping events debugging
forward: Enables IGMP snooping forwarding debugging
groups: Enables IGMP snooping multicast groups debugging
packets: Enables IGMP snooping packets debugging
timers: Enables IGMP snooping timers debugging
Description
Use the debugging mpm command to enable IGMP snooping debugging. Use the
undo debugging mpm to disable IGMP snooping debugging.
By default, IGMP snooping debugging is disabled.
Example
# Enable IGMP snooping timers debugging.
<Quidway> debugging mpm timers
MPM timers debugging switch is on.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English