Command Manual – Security
Quidway S8500 Series Routing Switches
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-19
Example
# Specify the URL of the Web page used to change password on the self-service server
to be
http://10.153.89.94/selfservice/modPasswd1x.jsp|userName.
[Quidway] domain system
[Quidway-isp-system] self-service-url enable
http://10.153.89.94/selfservice/modP
asswd1x.jsp|userName
2.1.19 service-type
Syntax
service-type { ftp [ ftp-directory directory ] | lan-access | ppp [call-number
call-number | callback-nocheck | callback-number callback-number ] | ssh [ level
level | telnet | terminal ] | telnet [ level level | ssh | terminal ] | terminal [ level level |
ssh | telnet ] }
undo service-type { ftp [ ftp-directory directory ] | lan-access | ppp [call-number
call-number | callback-nocheck | callback-number callback-number ] | ssh [ level
level | telnet | terminal ] | telnet [ level level | ssh | terminal ] | terminal [ level level |
ssh | telnet ] }
View
Local user view
Parameter
ftp: Specifies user types as FTP.
ftp-directory directory: Specifies the directory of FTP users, directory is a character
string of up to 64 characters.
lan-access: Specifies user type to Lan-access, which mainly refers to Ethernet
accessing users, 802.1x supplicants for example.
ppp: Specifies PPP users.
call-number: Sets the phone number of the caller.
callback-nocheck: Specifies nocheck when the Modem calls back.
callback-number: Sets the callback number for callback user.
ssh: Specifies SSH users.
telnet: Specifies user type as Telnet.
level level: Specifies the level of Telnet users. The argument level is an integer in the
range of 0 to 3 and defaults to 0.
terminal: Specifies user type as Terminal.
To Next Page
Loading...
