Huawei Quidway S8500 Series User Manual

Command Manual – PoE
Quidway S8500 Series Routing Switches Chapter 1 PoE Configuration Commands
Huawei Technologies Proprietary
1-3
View
Any view
Parameter
interface-name | interface-type interface-num: Port on the switch; refer to Command
Manual – Port for details.
Description
Use the display poe interface power command to display the PoE power information
of a specific port or all ports on the switch.
Example
# Display the power information of the port GigabitEthernet3/1/1.
<Quidway> display poe interface power GigabitEthernet3/1/1
Port power :700 mW
1.1.3 display poe pse
Syntax
display poe pse
View
Any view
Parameter
None
Description
Use the display poe pse command to display the parameters of all the PoE cards in
the switch that serve as a power sourcing equipment (PSE).
Example
# Display the parameters of all the PoE cards in the switch.
<Quidway> display poe pse
PSE Information of board 6:
Power Current Value :67 W
Power Remaining Value :738 W
Power Max Value :806 W
Power Peak Value :1 W
Power Average Value :0 W
Software Version :290

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English