Command Manual – NAT&URPF&VPLS
Quidway S8500 Series Routing Switches Chapter 1
NAT Configuration Commands
Huawei Technologies Proprietary
1-3
Example
# Display all the configurations of the blacklist.
<Quidway> display nat blacklist all
Blacklist function global configuration:
Blacklist function is started.
Connection amount control is enabled.
Connection set-up rate control is enabled.
Amount control limit: 500 sessions.
Rate control limit: 40 session/s.
Special rate control limit: 30 session/s.
Altogether 2 IP addresses have special configuration:
Control limit configuration of IP 11.1.1.91:
Amount control upper limit: 50 sessions.
Rate control limit uses special configuration.
Control limit configuration of IP 10.1.1.91:
Amount control upper limit: 50 sessions.
Rate control limit uses special configuration.
# Display the blacklist configurations and operation states for IP address 1.1.1.1.
<Quidway> display nat blacklist ip 1.1.1.1 slot 3
Blacklist function global configuration:
Blacklist function is started.
Connection amount control is enabled.
Connection set-up rate control is enabled.
Amount control limit: 500 sessions.
Rate control limit: 40 session/s.
Special rate control limit: 30 session/s.
Control limit configuration of IP 1.1.1.1:
Amount control upper limit: 50 sessions.
Rate control limit uses special configuration.
Blacklist running statistics of IP 1.1.1.1:
Amount of connection already set up: 0 sessions.
IP 1.1.1.1 is not in the blacklist!
1.1.4 display nat outbound
Syntax
display nat outbound
View
Any view
To Next Page
Loading...
