Command Manual – MPLS
Quidway S8500 Series Routing Switches Chapter 2 BGP/MPLS VPN Configuration Commands
Huawei Technologies Proprietary
2-49
Parameter
ebgp-preference: Preference of the routes learned from the EBGP peer, in the range 1
to 256.
ibgp-preference: Preference of the routes learned from the IBGP peer, in the range 1 to
256.
local-preference: Preference of the Local routes, in the range 1 to 256.
Description
Use the preference command to set preference value for a BGP route.
Use the undo preference command to remove the setting.
Example
# Set the preference of the preference of the routes learned from the EBGP peer to 2,
the preference of the routes learned from the IBGP peer to 3 and the preference of the
local routes to 4.
[Quidway-bgp-af-vpn-instance] preference 2 3 4
2.1.60 reflect between-clients
Syntax
reflect between-clients
undo reflect between-clients
View
VPNv4 subaddress family view
Parameter
None
Description
Use the reflect between-clients command to allow the routing reflection between
clients.
Use the undo reflect between-clients command to forbid routing reflection between
clients (PE to PE).
By default, the routing reflection between clients is allowed.
The router reflector reflects one client’s route to others after configuration.
Related command: reflect cluster-id and peer reflect-client.
To Next Page
Loading...
