Huawei Quidway S8500 Series - Reset Stop-Accounting-Buffer

Command Manual – Security
Quidway S8500 Series Routing Switches
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-59
View
User view
Parameter
accounting: Clears all the HWTACACS accounting statistics.
authentication: Clears all the HWTACACS authentication statistics.
authorization: Clears all the HWTACACS authorization statistics.
all: Clears all statistics.
Description
Use the reset hwtacacs statistics command to clear HWTACACS protocol statistics.
Related command: display hwtacacs.
Example
# Clear all HWTACACS protocol statistics.
<Quidway> reset hwtacacs statistics
2.3.13 reset stop-accounting-buffer
Syntax
reset stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name
View
User view
Parameter
hwtacacs-scheme hwtacacs-scheme-name: Configures to delete the stop-accounting
requests from the buffer according to the specified HWTACACS scheme name. The
hwtacacs-scheme-name specifies the HWTACACS scheme name with a character
string not exceeding 32 characters, excluding“?”.
Description
Use the reset stop-accounting-buffer command to clear the stop-accounting
requests that have no response and are buffered on the switch.
Related command: stop-accounting-buffer enable, retry stop-accounting, display
stop-accounting-buffer.
Example
# Delete the buffered stop-accounting requests that are related to the HWTACACS
scheme “huawei”.