Command Manual – MPLS
Quidway S8500 Series Routing Switches Chapter 2 BGP/MPLS VPN Configuration Commands
Huawei Technologies Proprietary
2-53
2.1.64 timer
Syntax
timer keep-alive keepalive-interval hold holdtime-interval
undo timer
View
VPN-instance subaddress family view
Parameter
keepalive-interval: Time interval to send Keepalive messages, in seconds and ranging
1 to 65535. It defaults to 60 seconds.
holdtime-interval: Hold time, in seconds and ranging 3 to 65535. It defaults to 180
seconds.
Description
Use the timer command to specify the time interval and hold time for sending
Keepalive messages.
Use the undo timer command to restore the default value.
The timer defined with the peer timer command takes preference over that with the
timer command.
Related command: peer timer.
Example
# Set the time interval and hold time for sending Keepalive messages.
[Quidway-bgp-af-vpn-instance] timer keep-alive 60 hold 180
2.1.65 traffic-redirect
Syntax
traffic-redirect inbound { link-group { acl-number | acl-name } [ rule rule
[ system-index index ] ] | ip-group { acl-number | acl-name } [ rule rule [ system-index
index ] ] } interface { interface-name | interface-type interface-number }
destination-vlan l3-vpn
undo traffic-redirect inbound { link-group { acl-number | acl-name } [ rule rule ] |
ip-group { acl-number | acl-name } [ rule rule ] }
View
Ethernet port view
To Next Page
Loading...
Need help?
General