Huawei Quidway S8500 Series User Manual

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-4
5.1.4 compare-different-as-med
Syntax
compare-different-as-med
undo compare-different-as-med
View
BGP view
Parameter
None
Description
Use the compare-different-as-med command to enable comparison of MED values
from different AS neighboring routes.
Use the undo compare-different-as-med command to disable the comparison.
By default, it is disabled to compare the MED attribute values from the routing paths of
different AS peers.
If there are several routes available to one destination address, the route with smaller
MED parameter can be selected as the final route item.
Do not use this command unless it is determined that the same IGP and routing
selection mode are adopted by different autonomous systems.
Example
[Quidway-bgp] compare-different-as-med
5.1.5 confederation id
Syntax
confederation id as-number
undo confederation id
View
BGP view
Parameter
as-number: The ID of BGP AS confederation. It is equal to the AS number which
contains the AS numbers of multiple sub-ASs. The range is 1 to 65535.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English