Huawei Quidway S8500 Series - Multicast-Suppression

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches Chapter 3 Multicast Common Configuration Commands
Huawei Technologies Proprietary
3-15
Example
# Enable multicast routing.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] multicast routing-enable
3.1.14 multicast-suppression
Syntax
multicast-suppression { ratio | bandwidth bandwidth }
undo multicast-suppression
View
Ethernet port view
Parameter
ratio: Specifies the maximum wire speed ratio of the multicast traffic allowed on the port.
The value range is 1 to 100, and the default value is 50. The smaller the ratio is, the
smaller the multicast traffic is allowed to pass.
bandwidth: Specifies multicast suppression bandwidth on the port. The value range is 1
to the maximum value of port bandwidth.
Description
Use the multicast-suppression command to set the multicast suppression ratio or
multicast suppression bandwidth.
Use the undo multicast-suppression command to disable the multicast suppression
function.
The default multicast suppression ratio is 100%.
You can use the multicast-suppression command repeatedly. The effective multicast
suppression ratio value is the one last updated.