Huawei Quidway S8500 Series User Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-47
Example
# Configure channel 6 as the SNMP information channel.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] info-center snmp channel 6
4.6.15 info-center source
Syntax
info-center source { modu-name | default } channel { channel-number |
channel-name } [ debug { level severity | state state }* | log { level severity | state
state }* | trap { level severity | state state }* ]*
undo info-center source { modu-name | default | all } channel { channel-number |
channel-name }
View
System view
Parameter
modu-name: Module name.
Table 4-9 gives the details.
Table 4-9 The module name field
Module name Description
8021X 802.1X module
ACL ACL (access control list) module
ADBM MAC address management module
ARP ARP (address resolution protocol) module
BGP BGP (border gateway protocol) module
CFM Configuration file management module
CMD Command module
default Default setting of all modules
DEV Device management module
DHCP Dynamic host configuration protocol module
DIAGCLI Diagnosis module
DNS Domain name server module
DRVMPLS MPLS (multiprotocol label switching) drive module

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English