Command Manual – Getting Started
Quidway S8500 Series Routing Switches Chapter 2
Password Control Configuration Commands
Huawei Technologies Proprietary
2-7
# Disable password aging.
[Quidway]undo password-control aging
Password aging disabled for all users.
# Enable history password recording.
[Quidway]password-control history enable
Password history enabled for all users.
# Disable history password recording.
[Quidway]undo password-control history
Password history disabled for all users.
2.1.7 password-control super
Syntax
password-control super { aging aging-time | length min-length }
undo password-control super { aging | length }
View
System view
Parameter
aging-time: Specifies the aging time for super passwords. The value range is 1 to 365
days and the default value is 90 days.
min-length: Specifies the minimum length for super passwords. It ranges from 4 to 16
characters, and the default value is 10 characters.
Description
Use the password-control super command to configure some password control
parameters for super commands, including the password aging time and the minimum
password length. Use the undo password-control super command to restore the
default settings.
Example
# Set the password aging time for super commands to 10 days.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] password-control super aging 10
To Next Page
Loading...
Need help?
General