Huawei Quidway S8500 Series User Manual

Command Manual – NAT&URPF&VPLS
Quidway S8500 Series Routing Switches Chapter 1
NAT Configuration Commands
Huawei Technologies Proprietary
1-16
Caution:
If you disable NAT or NAPT and then want to enable them again, it is recommended
that you execute the reset nat session slot command.
1.2 NAT Security Logging Configuration Commands
1.2.1 display ip userlog export
Syntax
display ip userlog export slot slotno
View
Any view
Parameter
None
Description
Use the display ip userlog export command to display configurations and statistics of
system logging.
Example
# Display configurations of NAT logging.
[Quidway] display ip userlog export slot 3
IP userlog export is not enable.
No ACL referenced as NAT userlog rule.
Version 1 is enabled.
Flow-begin mode stopped.
Uselog active time : 0 minutes
Exporting logs to 0.0.0.0 ( 0 ).
Export use source address 0.0.0.0.
1.2.2 ip userlog nat
Syntax
ip userlog nat acl acl-number
undo ip userlog nat

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English