Huawei Quidway S8500 Series - Server-Type

Command Manual – Security
Quidway S8500 Series Routing Switches
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-43
2.2.23 server-type
Syntax
server-type { huawei | standard }
undo server-type
View
RADIUS scheme view
Parameter
huawei: Configures the switch system to support the RADIUS scheme of Huawei type,
which requires the RADIUS client end (switch system) and RADIUS server to interact
according to the private RADIUS protocol regulation and packet format of Huawei
Technologies Co., Ltd.
standard: Configures the switch system to support the RADIUS server of Standard
type, which requires the RADIUS client end (switch system) and RADIUS server to
interact according to the regulation and packet format of standard RADIUS protocol
(RFC 2138/2139 or newer).
Description
Use the server-type command to configure the RADIUS scheme type supported by
the switch.
Use the undo server-type command to restore the RADIUS scheme type to the
default value.
The default RADIUS server type of a newly created RADIUS scheme is standard. The
RADIUS server type of the default RADIUS scheme (with a name of “system”), which is
created by the system, is huawei.
Quidway S8500 Series Routing Switches support standard RADIUS protocol and the
extended RADIUS service platform IP Hotel, 201+ and Portal etc independently
developed by Huawei Technologies. This command is used to select the supported
RADIUS scheme type.
Related command: radius scheme.
Example
# Set RADIUS scheme type of RADIUS scheme “huawei”, to huawei.
[Quidway-radius-huawei] server-type huawei