Huawei Quidway S8500 Series - Display Stop-Accounting-Buffer Hwtacacs-Scheme

Command Manual – Security
Quidway S8500 Series Routing Switches
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-52
Description
Use the display hwtacacs command to view configuration information of one or all
HWTACACS schemes.
By default, configuration information of all HWTACACS schemes is displayed.
Related command: hwtacacs scheme.
Example
# Display the configuration information of the HWTACACS scheme gy.
<Quidway> display hwtacacs gy
--------------------------------------------------------------------
HWTACACS-server template name : gy
Primary-authentication-server : 172.31.1.11:49
Primary-authorization-server : 172.31.1.11:49
Primary-accounting-server : 172.31.1.11:49
Secondary-authentication-server : 0.0.0.0:0
Secondary-authorization-server : 0.0.0.0:0
Secondary-accounting-server : 0.0.0.0:0
Current-authentication-server : 172.31.1.11:49
Current-authorization-server : 172.31.1.11:49
Current-accounting-server : 172.31.1.11:49
Source-IP-address : 0.0.0.0
key authentication : 790131
key authorization : 790131
key accounting : 790131
Quiet-interval(min) : 5
Response-timeout-Interval(sec) : 5
Domain-included : No
Traffic-unit : B
Packet traffic-unit : one-packet
2.3.4 display stop-accounting-buffer hwtacacs-scheme
Syntax
display stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name
View
Any view
Parameter
hwtacacs-scheme hwtacacs-scheme-name: Displays information on buffered
stop-accounting requests related to the HWTACACS scheme specified by